®
PRO-HDBaseT2P
9. RS-232(terminal block format):
The order of RS-232 pin are TX, RX, GND
(from the left side to the right)
10. IR Receiver:
Infrared 3.5mm socket for plugging in the extension cable of IR
receiver
11. IR Blaster:
Infrared 3.5mm socket for plugging in the extension cable of IR
blaster
12. HDMI IN:
Connect to a HDMI input source
13. HDMI LOOPOUT #1:
Connect to a HDMI display with a HDMI male-male cable here
14. HDMI LOOPOUT #2:
Connect to a HDMI display with a HDMI male-male cable here
15. HDMI Signal OUT1-2:
Link to each HDMI display via a Cat-5/5e/6 cable with a
HDMI over Cat.X receiver.
8
