®
PRO-HDBaseT2P
13
Output
2 firmware update
(1)Please adjust dip switch [pin1, pin 2]=[
-
]
(2)Connect the Micro-USB cable between PC and device
(3)Open the firmware update software
(4)Set the correct COM port and baud rate (57600 is recommended)
(5)Click the FILE button to load firmware file (.hex or .bin file)
(6)Device power on
(7)Press Program MCU symbol to do firmware update
(8)Once update process is done, please power cycle the device and set the dip
switch [pin 1, pin 2] to [
-
]
(9)Power cycle the device
(6)Device power on
(7)Press Program MCU symbol to do firmware update
(8)Once update process is done, please power cycle the device and set the dip switch
[pin 1, pin 2] to [
-
]
(9)Power cycle the device
