gofanco PRO-HDBaseT-U, Руководство пользователя, Страница: 9 / 16

®
PRO-HDBaseT-U
Receiving unit PRO-HDBaseT-U-RX
9
Front Panel
Rear Panel
1. HDMI OUT: Connect to a HDMI display with a HDMI male-male cable
2. Stereo Output: External analog audio output from transmitter over HDBaseT
3. S/PDIF Output: local ARC output
4. IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster
5. IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver
6. USB: Connect to USB Device
7. Micro-USB: Connect to USB Host
8. RS-232: Connect to serial port device with a DSUB-9 male-male or male-female cable
here F/W update for Valens chipset
9. DIP Switch
RJ45: Plug in a Cat-5/5e/6 cable that needs to be linked to the transmitting unit TX
[Green LED] Link indicator LED
[Yellow LED] When receiving unit receive the HDMI signal, the LED light will shine
LED: Power indicator
+12V DC: Connect to a 12V DC power supply.
2 3 4 5 1
7 8 9
10
11 12 6
DIP Switch Position Description
PIN#1
ON[

]
Link to USB Host (USB-micro port)
OFF[

]
Link to USB Device (USB Type A port)
PIN#2 PIN#3
ON[

] ON[

]
For HDBaseT Firmware Update
ON[

] OFF[

] HDBaseT Monitor Mode
OFF[

] ON[

]
For System Firmware Update
OFF[

] OFF[

] RS-232 Normal Use
ON[  ] OFF[  ]
10.
11.
12.