gofanco PRO-HDBaseT-U, Руководство пользователя, Страница: 8 / 16

®
PRO-HDBaseT-U
7. Panel Description
Front Panel
Rear Panel
1. HDMI IN: Connect to a HDMI source with a HDMI male-male cable
2. Stereo Input: Provide a channel to extend an external analog audio to receiver over HD -
BaseT
3. IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster
4. IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver
5. USB: Connect to USB Device
6. Micro-USB: Connect to USB Host
7. RS-232: Connect to serial port device with a DSUB-9 male-male or male-female cable
here F/W update for Valens chipset
8. DIP Switch
9. RJ45: Plug in a Cat-5/5e/6 cable that needs to be linked to the transmitting unit RX
[Green LED] Link indicator LED
[Yellow LED] When transmitting unit receive the HDMI signal, the LED light will shine
LED: Power indicator
+12V DC: Connect to a 12V DC power supply.
8
2 3 4 1
6 7 8 9 10 11 5
Transmitting unit PRO-HDBaseT-U-TX
DIP Switch Position Description
PIN#1
ON[

]
Link to USB Host (USB-micro port)
OFF[

]
Link to USB Device (USB Type A port)
PIN#2 PIN#3
ON[

] ON[

]
For HDBaseT Firmware Update
ON[

] OFF[

] HDBaseT Monitor Mode
OFF[

] ON[

]
For System Firmware Update
OFF[  ] OFF[  ] RS-232 Normal Use
ON[

] OFF[

]
10.
11.