background image

2

Thank you for purchasing from gofanco. Our products

aim to meet all your connectivity needs wherever you

go. For optimum performance and safety, please read

the instructions carefully and keep this User's Guide for

future reference.  If you need more information about

our products, please visit www.gofanco.com. For

technical support, email us at [email protected].

For drivers or manual download, please go to

www.gofanco.com/download.

Important Safety Notices

Please read safety instructions carefully before installation

and operation.

Please pay close attention to all warnings and hints

for this device

Do not expose this unit to rain, heavy moisture, or

liquid

Do not put any items into the device or attempt to

modify its operation

Do not repair the device or open the enclosure

without professional guidance to avoid electric

shocks. Doing so may void your warranty

Keep the product in a well-ventilated location to

avoid damage from overheating

Shut off power and make sure environment is safe

before installation

Do not plug the HDMI cables and IR cables

in/out when the device is in use to avoid cable

damage.  Make sure they are plugged into the

correct ports

Use the included power adapter only. Make sure

the specification matches if using 3rd-party DC

power adapters

Содержание Matrix44-HDBT

































Отзывы: