8
Pairing Instructions
1.
Power on the TX and RX. Place them in close
proximity to each other.
2.
Simultaneously press and hold down the pairing
button on both TX and RX units for 3 seconds.
3
The Link LED on both units will begin flashing
quickly, continue holding down both pairing
buttons.
4.
Release both pairing buttons when the RX's Link
LED is solid on and the TX's Link LED remains
blinking.
5.
The TX are RX are successfully paired.
TX Link LED
Status
RX Link LED
Status
Description
Flashing Quickly Flashing Quickly The TX and RX are
pairing
Flashing Quickly On
The TX and RX are
paired successfully
Off
Off
No pairing or no signal
transmission after
successful pairing
Flashing Slowly
Flashing Slowly
The TX and RX are
transmitting data
