gofanco HDExt4P-HD14, Руководство пользователя

Страница: 7 / 16

7
Hardware Installation
1. Power off all devices including your HDMI source
and HDMI display(s).
2. Connect your HDMI source device to the 1x4 HDMI
1.4 Splitter/Extender's HDMI In connector with an
HDMI cable (HDMI cable not included).
3. Connect your CAT6/7 cables between the Splitter/
Extender and CAT6/7 Receivers.
4. Optional: Connect an HDMI display to the HDMI
Out connector of the Splitter/Extender using an
HDMI cable (HDMI cable not included). This
connection is needed only if you require local
monitoring of the HDMI signal.
5. Connect an HDMI display to each CAT6/7
Receiver's HDMI Out connector with an HDMI
cable (HDMI cables not included).
6. Optional: Connect the IR Receiver cables and the
IR Emitter cable to the IR interface ports. This
connection is needed only if you need to control
your HDMI devices from the remote location. See
IR Control, starting on page 9, for proper IR
connection.
7. Plug the included power adapter into the Splitter/
Extender 's Power Jack, then plug the power adapter
into a reliable power outlet. Note : The CAT6/7
Receivers do not need power adapters, they can be
powered from the Splitter/Extender over CAT
cable with PoC technology.
8. Power on your HDMI source device and HDMI
display(s). The Splitter/Extender is ready for use.