gofanco HDExt4P-HD14, Руководство пользователя

Страница: 11 / 16

11
Controlling the Display Device(s) using IR All In Port
Allows remote controlling of all of the display devices
simultaneously.
1. Connect an IR Receiver Cable to the IR All In port of
the Splitter/Extender.
2. Connect an IR Emitter Cable to the IR Out port on
each CAT6/7 Receiver.
3. Point the IR Emitter Cable's IR eye in line with the
display's IR window.
Figure 7: Display Device IR Control Connection Diagram
Note:
The IR All In will relay the received IR signal to all the
CAT6/7 outputs whereas the IR IN connectors associated
with each CAT6/7 output will only relay the IR signal to
its respective CAT6/7 Receiver.
The Splitter/Extender's IR Out connector will output the
IR signals received from any of the CAT6/7 Receivers, so
as to allow control of a source from any of the remote
CAT6/7 Receivers.