5
Installation Requirements
1.
HDMI source device (computer, DVD
player, etc)
2.
HDMI display device (SDTV/Monitor,
HDTV/Monitor, projector, etc.)
3.
UTP/STP CAT6 cable following
IEEE-T568B wiring standard
Product Layout
Figure 1: Transmitter (TX)
1. Reset Button Press the button to reset the transmitter
2. RJ45 Output Connects to the Receiver's RJ45 Input port
using a CAT6 cable
3. Link LED
Lights up when HDMI input signal detected
Flashes when no HDMI input signal detected
4. Power Jack
Connects to the included power adapter
5. HDMI Input Connects to the HDMI source device
6. IR Output
Connects to the IR Blaster cable
