gofanco HDBaseT4P-4K, Руководство пользователя

Страница: 5 / 16

5
Figure 2: HDBaseT Splitter Rear Panel Layout
1 HDMI Input Connects to an HDMI source device
2 HDMI Output Connects to an HDMI display
3
HDBT Out (1-3) Connects to the HDBT In of the Receiver unit
IR In (1-3) Connects to the IR Receiver Extension cable
4 L/R Out 3.5mm unbalanced Stereo audio output jack
5 Balanced Out Balanced Stereo de-embedded audio output
6
All In/Loop In IR Input routed to all HDBaseT IR outputs
IR Out
Connects to IR Blaster Extension cable. Emits IR
signals received from the HDBaseT Receiver
Loop Out
3.5mm jack for connecting the IR LOOP IN port
of the next Extender/Splitter for IR cascading
7 DC 24V Connects to the included 24V power adapter
Product Layout
1 Power LED
Off: No power
On: Extender/Splitter is powered on
2 HDMI In LED
Off: No HDMI input signal detected
On: HDMI input signal detected with HDCP
Flashing: HDMI input signal detected with no
HDCP
3 HDMI Out LED
Off: No HDMI output signal detected
On: HDMI output signal detected with HDCP
Flashing: HDMI output signal detected with no
HDCP
4 EDID DIP Switch Select between Lo-Res, Default, Hi-Res modes
5 Service Micro USB port for firmware upgrade
Figure 1: HDBaseT Extender/Splitter Front Panel Layout