8
Hardware Installation
Note:
To achieve
optimal performance, a CAT6 cable is
recommended.
1. Power off all devices including your HDMI source and
display.
2. Connect your HDMI source to the Transmitter's
HDMI
IN
connector.
3. Optional: Connect the IR Blaster extension cable to the
Transmitter's
IR Out
. Face the eye towards your HDMI
device's IR window.
4. Connect your HDMI display to the Receiver's
HDMI OUT
connector with an HDMI cable (not included).
5. Optional: Connect the IR Receiver extension cable to the
Receiver's
IR In
.
6. Connect and link the Transmitter and Receiver by a
CAT5e/6 cable.
7. Plug the included power adapters into the Transmitter's
and Receiver's
Power Jacks
, then plug both power
adapters into reliable power outlets.
8. Power on your HDMI device and HDMI display.
9. The HDMI Extender is ready for use.
* When using the remote control, please make sure its
distance to the IR Receiver extension cable is within 5
meters and without obstructions.
