2
| Deutsch
9
| English
www.goebel-group.com
2. Tool preparation
Danger
Before replacing the damaged parts, such as the nosepieces or clamping jaws, you
must first remove the battery from the tool.
Failure to remove the battery first may result in injury or property damage.
Select a nosepiece that meets the rivet specification or other parts that need to be
replaced (see the following illustration).
Read the following special tips carefully before using the riveting tool:
•
Make sure that the battery has been removed from the tool as shown.
2.1 Changing the mouthpiece
•
According to figure
➀
, loosen the nosepiece with a wrench in the direction of the arrow
and unscrew the nosepiece.
•
According to the illustration
➅
, screw the nosepiece that needs to be replaced with a
wrench in the direction of the arrow and tighten the nosepiece.
2.2 Changing the jaws
•
According to figure
➁
, loosen the screw cover with a wrench in the direction of the
arrow and unscrew the screw cover. According to figure
➂, loosen the clamping sleeve
with a spanner in the direction of the arrow and unscrew the clamping sleeve.
•
Replace the three clamping jaws and other parts as shown in the following figure.
•
According to figure
➃,➄
, turn the clamping sleeve and screw cap in the direction of the
arrow and tighten them with a spanner, then simply charge the battery.
