GOEBEL GO-100, Руководство пользователя

Страница: 14 / 24

4.2 Service
To keep the tool in good working order, it is advised to service the tool and
replace the worn parts regularly. Service is available and guaranteed by
suppliers/distributors.
5. Operating Safety Instructions
It is IMPORTANT to follow the safety instructions for adequate protection
against electrical shock, injuries or hazards:
- This tool should be used exclusively to apply blind rivets, it cannot
be used for other purposes, e.g. Hammer.
- Do not overload the tool, and have the tool working within the
prescribed working capacity ( see 1.1 ).
- Do not expose the tool to humidity or rain, do not operate the tool
close to inflammable substances or gases.
- When the tool is suspended by the operation hook during use, be
sure it cannot fall.
- Remove the battery when the tool is not in use and when sent for
repairs or service.
- When not in use, keep the tool in the packaging box, out of reach of
children.
- When working with the tool, always carry protective goggles. The
use of personal protective gear like clothes, gloves, safety helmet,
and other necessary protection is highly recommended.
- Never obstruct the air inlet holes on the tool housing when opera
ting and do not try to put anything into them.
- When operating, be sure the mandrel collector is set.
- Use only genuine spare parts for repairs.
- Repair work must be carried out by skilled personal. When in doubt,
always return the tool to the authorized distributors.
- Only use the tool in riveting holes.The blind rivet could be ejected
from the tool. Never aim the tool at yourself or at another person or
animals!
14