Digital Video Recorder: User manual
29
4.3.3 Video Loss
When the equipment cannot obtain the channel video signal , the video loss alarm is turned on and the linkage function is turned on.
Set method: refer to chapter 4.3.1.
4.3.4 Alarm input
When the equipment obtains the external alarm signal, the alarm function is turned on.
Set method: refer to chapter 4.3.1.
4.3.5 Alarm output
Refer to chapter 3.5.4.
4.3.6 Abnormality
Analyzing and inspecting current software and hardware of the device: When some abnormal events happen the device will make a relative answer
such as show message and buzzer.
[Event type
] Selecting abnormity you want to inspect.
[
Enable
] Select it to make sure abnormal function workable.
[
Show message
] Automatically alarm cue dialog box come out of the main screen.
[Buzzer
] The buzzer rings when alarm occurs.
4.4 System setup
Set the system parameters such as general setup, code setup, network setup, network service, output mode, PTZ control, serial port setup and
alternate patrol setup.
4.4.1 General setup
[
System time
] Set system data and time.
[
Data format]
Choose the data format: YMD, MDY, DMY.
