Godrej ET - 16AHD2, Руководство пользователя

Страница: 27 / 69

24
<PreRecord> Record 3 seconds before the action. (Time length is decided by the code
stream).
<Record mode> Set video state: schedule, manual or stop.
Schedule: Record according to the set video type (Common,
detection and alarm) and time section.
Manual: Click the button and the according channel is recording no
matter the channel in any state.
Stop: Click the stop button and the according channel stops
recording no matter the channel in any state.
<Period> Set the time section of common recording. The recording will start only in
the set range.
<Record type> Set recording type: regular, detection or alarm.
Regular: Perform the regular recording in the set time section. The
video file type is “R”.
Detect: Trigger the “motion detect”, “camera mask” or “video loss”
signal. When above alarm is set as opening recording,
the“detection recording” state is on. The video file type is “M”.
Alarm: Trigger the external alarm signal in the set time section.
When above alarm is set as opening recording, the
“detection recording” state is on. The video file type is
“A”.Alarm type recording happens only in ET – 16AHD2
Refer to chapter 4.3 to set corresponding alarm function.
4.2.2 Playback
Refer to chapter 3.5.2.
4.2.3 Backup
You can back up the video files to external storage through setup.
Note: The storage must be installed before the file backup. If the backup is
terminated, the already backup can playback individually.