Godrej EON VESTA DWF EON VES 12U NF STSL, Руководство пользователя

Страница: 12 / 29

• Please use powder detergents in such
programmes.
• If you encounter problems when using
combined detergents, please contact
the detergent manufacturer.
• When you stop using combined
detergents, make sure that water
hardness and rinse aid settings are set to
correct level.
4.10. Rinse-aid usage
• Rinse-aid makes dishes sparkle and
helps them to dry without spotting. •
Rinse-aid is required for stain-free
utensils and clear glasses.
• Use only rinse-aid for domestic
dishwashers.
4.11. Filling the rinse-aid and setting
• To fill the rinse aid compartment, open
the rinse-aid compartment cap.
• Fill the compartment with rinse aid to the
MAX level and then close the cap.
• Be careful not to overfill the rinse aid
compartment and wipe up any spills.
WARNING: Use only those rinse aid
materials which are allowed for use in the
machine. As rinse aid residues left as a result
of overflowing will create extremely high
amounts of foam and thus reduce the
washing performance, remove the excess
amount of rinse aid by wiping it with a rag.
In order to change the rinse aid level,
follow the below steps before turning on
the machine:
• Push the programme button and hold it
down.
• Turn on the machine.
• Hold down the programme button until
the LEDs flash twice. Rinse aid set
follows water hardness set.
• The machine will display the current
setting.
• Change level by pushing the programme
button.
• Switch off the machine to save the
setting.
The factory setting is “4”.
If the dishes are not drying properly or are
spotted, increase the level. If blue stains
form on your dishes, decrease the level.
Level Brightener Dose Indicator
1 Rinse-aid not
dispensed
Wash LED is on.
2 1 dose is
dispensed
Dry LED is on.
3 2 doses are
dispensed
End LED is on.
4 3 doses are
dispensed
Wash and Dry LEDs
are on.
5 4 doses are
dispensed
Wash and End LEDs
are on.
11