Godox V1F, Инструкция по эксплуатации

Страница: 29 / 30

If there is a problem, refer to this Troubleshooting Guide.
The Camera Flash does not fire.
● The camera flash is not attached securely to the camera.
→ Attach the camera’s mounting foot securely to the camera.
●
The electrical contacts of the Camera Flash and camera are dirty.
→
Clean the contacts.
●
< > or < > is not displayed in the view finder of camera.
→
Wait until the flash is fully recycled and the flash ready indicator
lights up.
→
If the flash ready indicator lights up, but < > or < > is not
displayed in the view finder, check whether this flash unit is
securely attached to the camera hotshoe.
→
If the flash ready indicator does not light up after a long wait,
check whether the battery power is enough. If the battery power
is low, < > will appear and blink on the LCD panel. Please
replace the battery immediately.
The power turns off by itself.
●
After 90 seconds of idle operation, auto power off took effect if the
flash is set as Transmitter.
→
Press the shutter button halfway or press any flash button to
wake up.
●
After 60 minutes (or 30 minutes) of idle operation, the flash unit
will enter sleep mode if it is set as Receiver.
→
Press any flash button to wake up.
Auto zoom does not work.
●
The camera flash is not attached securely to the camera.
→
Attach the camera flash’s mounting foot to the camera.
The flash exposure is underexposed or overexposed.
●
You used high-speed sync.
→
With high-speed sync, the effective flash range will be shorter.
Make sure the subject is within the effective flash range
displayed.
●
You used Manual Flash mode.
→
Set the flash mode to ETTL or modify the flash output.
Photos have dark corners or only parts of the target subject
are illuminated.
●
The focal length of lens exceeds the flash coverage.
→
Check the flash coverage you set. This flash unit has the flash
coverage between 28 and 105mm, which fits medium-format
cameras.