Godox UL150II, Инструкция по эксплуатации

Страница: 17 / 20

6. Switch from AC Power Supply to V-mount Battery
Power Supply
Unplug the power cable and install V-mount battery then turn on the
product.
Note
： If you install the V-mount battery before unplugging the power cable
，
and the
brightness value is set higher than the maximum brightness that the battery can be
turned on
，
then you switch to V-mount battery power supply by unplugging the power
cable, the light and the controller will automatically power off. The machine can only
resume normal operation after reboot.
Maximum Brightness in Different States
CT mode
：
Maximum Brightness (%)
linear
50％
100％
100％
100％
100％
S-curve
50％
100％
100％
100％
100％
exponential
50％
100％
100％
100％
100％
logarithmic
50％
100％
100％
100％
100％
FX mode: Maximum Brightness (%)
Power Supply
14.8V(single)
14.8V(double)
26V(single)
14.8V+26V
26V(double) linear
50％
100％
100％
100％
100％
100％
AC Power Supply/48V DC Power Supply
Power Supply
14.8V(single)
14.8V(double)
26V(single)
14.8V+26V
26V(double)
AC Power Supply/48V
DC Power Supply
100％ 100％ 100％ 100％
Note: The dimming curve is not adjustable in FX mode, it is linear in default. The above
data is based on 26V 270Wh 10.5Ah battery and 14.8V 150Wh 10.2 Ah battery.
Software Upgrade
1.Download the new firmware to the U disk from the official website (http://www.go -
dox.com.cn/Downloads.html).
2. Turn off the device. Insert the U disk with new firmware into the USB upgrade port.
3. Turn on the device, and it will automatically enter the upgrading interface.
4.It will return to main interface after completion.
Notes:
1. New firmware must be downloaded from the official website, and keep only one BIN
file in the root directory of the USB disk.
2. The USB port can only support firmware upgrade function.
Maintenance
This product, except consumables e.g. adapter and power cable, is supported with a
one-year warranty.
Maintenance of the light must be performed by our authorized maintenance depart-
ment which can provide original accessories.
Unauthorized service will void the warranty.
If the product breaks down or gets wet, please do not use it until repaired by profession-
als. If there is anything abnormal during LED light’ s working, please turn it off imme-
diately and identify the reasons.
Declaration of Conformity
：
GODOX Photo Equipment Co,Ltd. hereby declares that the This equipment are in
compliance with the essential requirements and other relevant provisions of EU
Directive 2014/53/EU. They are allowed to be used in all EU member states.
For more information of DoC, Please click this web link:http://www.godox.com/
DOC/Godox_UL150II_DOC.pdf.
31 32