Godox UL150II, Инструкция по эксплуатации

Страница: 10 / 20

灯体尺寸
控制器尺寸
灯体重量
控制器重量 316.9*217.8*170mm
270.4*123.6*132mm
≈3.11kg
≈2.66kg
设计和规格如有变更，恕不另行通知。
照度数据
测试条件 1m 2m 3m 色温
5600K
5600K
裸灯
带标准罩
注：上述测试皆在灯体100％亮度下进行。
17 18
lux
fc
lux
fc
5700
530
71700
6660
1600
150
16000
1500
790
73
6000
560
本设备包含型号核准代码为:CMIITID:2020DP13510，为该产品的无线电发射模块。
照度单位
1.Before use, please read and understand these instructions and attentions.
2.Professional lighting is prohibited for children. When children are near, parents or
accompanying persons must supervise closely to prevent children from personal injury
due to collision with lamps or private use of lamps.
3.This lighting product is not ordinary lighting product and cannot be used for general
lighting. Anyone who has suffered eye damage or has sensitive eyes should avoid using
this product.
4.When the lamp is on, it must be used with care. Do not touch high-temperature parts,
such as LED lamp beads, to avoid burns.
5.When the lamp is on, it is forbidden to look directly at the lamp beads under any
circumstances. Strong light should be used under the guidance of professional lighting
engineers. Avoid prolonged exposure to strong light under any circumstances. If eye
discomfort, please turn off the lamp in time, suspend use, and see a doctor immediately.
6.If the lamp bead is damaged or deformed by heat, stop using this equipment, and
contact the manufacturer, service agent or qualified maintenance personnel to replace
the lamp bead in time to avoid accidents.
7.This product is only suitable for use in -20
℃
to 40
℃
operating environment and
normal humidity environment.
8.Do not use damaged equipment or accessories, and wait for professional maintenance
personnel to check and repair to confirm being normal before use.
9.During using, if the casing of this product is broken due to being dropped, squeezed or
subjected to strong impact, please do not use it, so as to avoid electric shock injury due
to contact with internal electronic components.
10.If an extension cord is required, please use an extension cord with a current rating
greater than or equal to that of the equipment. If an extension cord is rated less than the
equipment, overheating may result.
11.Some products have long power cords, please place the power cords properly and
keep them in a safe place. Avoid contacting the power cord with overheating surfaces,
avoid improper placement that could cause pulling damage, or trip on-site personnel.
Please use the certified power cord from the original manufacturer. If the product is
damaged by using a non-certified power cord, it will not be repaired by our factory.
12.Be sure to unplug equipment from the power outlet before cleaning and repairing.
When not in use, do not pull the power cord to unplug the equipment. For normal
power-off, please hold both ends of the plug of the equipment with your hands and pull
the plug out of power outlet. This equipment needs to be connected to a grounded outlet.
13.This equipment is not waterproof, please keep it dry and do not immerse it in water or
Safety Instructions and Attentions
First of all, as the most basic principle: This product is a professional lighting
set equipment and should be used by professional lighting engineers or under
the guidance of professionals. Basic safety attentions must always be followed
during use, as follows: