1
Press
<MENU>
Button to enter
C.Fn CH setting.
2
In C.Fn
CH
, turn the Select Dial
to choose channel ID from 1 to
32.
3
Press the Set Button to confirm.
2. Setting the Communication Channel
If there are other wireless flash systems nearby, you can change the
channel IDs to prevent signal interference. The channel IDs of the
Transmitter unit and the Receiver unit(s) must be set to the same.
Transmitter Unit Setting
Receiver Unit Setting
Wireless Multiple Flash Shooting
●
Use the supplied mini stand to position the Receiver unit.
●
Before shooting, perform a test flash and test shooting.
●
The transmission distance might be shorter depending
on the conditions such as positioning of Receiver units,
the surrounding environment and whether conditions.
You can divide the Receiver units into two or three groups and
perform TTL autoflash while changing the flash ratio (factor). In
addition, you can set and shoot with a different flash mode for each
firing group, for up to 4 groups.
●
Auto Shooting with Two Receiver Groups
A
B
●
Auto Shooting with Three Receiver Groups
A
B
C
1. Wireless Settings
You can switch between normal flash and wireless flash. For normal
flash shooting, be sure to set the wireless setting to OFF.
Press < > button so that
< > is displayed on the
LCD panel.
Press < > button so that
< > or < > are
displayed on the LCD panel.
3. Wireless ID Settings
Change the wireless channels and wireless ID to avoid interference
for it can only be triggered after the wireless IDs and channels of the
Transmitter unit and the Receiver unit are set to the same.Press the
<MENU> button to enter C.Fn ID. Press the Set Button to choose OFF
channel expansion shutdown, and choose any figure from 01 to 99.
4. Scan the Spare Channel
Using Automatic Wireless Flash with a Single Receiver Unit
5. TTL
：
Fully Automatic Wireless Flash Shooting
To avoid the interference of using the same channel by others, this
function can be used: enter the C.Fn settings and find the
SCAN
option. When setting it to
START
, it will scan from 1% to 100%. And
the 8 spare channels will be displayed after the scan is completed.
Ver 0.5
22 0 8 3 2 2 3
30 2 1 0 7 0 6
C.Fn
CLEAR
CH
ID
BEEP
SCAN
- 31 -
- 32 -
