Tips
：
When collocated with the
optional Godox Flash Power Box
PB960, TT685IIO will have more
flash times, shorter recycle time
and longer duration.
TT685IIO needs battery power supply when collocating with flash
power box.
CH
SYNC
●
Receiver Unit (RX)
: Receiver
●
What’s in the Box of TT685IIO Kit?
1. Flash Unit 2. Mini Stand 3. Protection Case 4.
Instruction Manual
1
2
3
4
●
LCD Panel in Three Modes
●
Attached to the Camera
●
2.4G Radio Transmission: As a Transmitter Unit
RX
CH
The product can be used in combination with the following
accessories sold separately, so as to achieve best photography
effects: XProC, X2T-C & X1C TTL wireless flash trigger, etc.
●
Separately Sold Accessories
SET
Attach the Camera Flash.
Secure the Camera Flash.
●
Rotate the hotshoe
fixing buckle to the left
and insert the camera
flash into the camera's
hotshoe.
●
Rotate the hotshoe
fixing buckle to the right
until it locks up.
Detach the Camera Flash.
●
Press the button and
rotate the hotshoe fixing
buckle to the left until it
is loosened.
1
2
3
Attaching to a Camera
Power Management
1
:Receiver icon
●
2.4G Radio Transmission: As a Receiver Unit
●
Loading and Unloading the Battery
To unload the battery, hold
down the battery and press
compartment and push the
battery downwardly to take it
out.
2
Put 4 batteries in with the
correct polarity after opening
the battery compartment,
then close and push it to the
top.
Use ON/OFF Power Switch to power the flash unit on or off. Turn off
if it will not be used for an extended period of time. Setting as a
transmitter flash, it will turn the power off automatically after a
certain period (approx. 90 seconds) of idle use. Pressing the camera
shutter halfway or pressing any flash button will wake up the flash
unit. Setting as a receiver flash, it will enter sleep mode after a
certain period (adjustable, 60 minutes by default) of idle use.
Pressing any flash button will wake it up.
Disabling Auto Power Off function is recommended
when the flash is used off camera. (C.Fn-STBY)
Receiver Auto Power Off Timer is set to 60 minutes by
default. Another option “30 minutes” is available.
(C.Fn-RX STBY)
C.Fn
C.Fn
- 25 -
- 26 -
SYNC
