Godox TT685II-O, Руководство пользователя

Страница: 32 / 174

32
Troubleshooting
If there is a problem, refer to this Troubleshooting Guide.
The Camera Flash cannot be charged
The battery is installed in the wrong direction.
• Install the battery in correct direction.
The camera flash’s internal battery is exhausted.
• If < > appears and blinks on the LCD panel, replace the battery immediately.
The Camera Flash does not fire.
The camera flash is not attached securely to the camera.
• A ttach the camera’s mounting foot securely to the camera.
The electrical contacts of the Camera Flash and camera are dirty.
•
Clean the contacts.
The power turns off by itself.
After 90 minutes of idle operation, auto power took effect if the flash is set as
Transmitter.
•
Press the shutter button halfway or press any flash button to wake up.
After 60 minutes (or 30 minutes) of idle operation, the flash unit will enter sleep mode if
it is set as Receiver.
•
Press any flash button to wake up.
Auto zoom does not work.
The camera flash is not attached securely to the camera.
•
A ttach the camera flash’s mounting foot the camera.
The flash exposure is underexposed or overexposed.
You used high-speed sync.
•
With high-speed sync, the effective flash range will be shorter. Make sure the
subject is within the effective flash range displayed.
You used Manual Flash Mode.
• Set the flash mode to TTL or modify the flash output.
Photos have dark corners or only parts of the target subject are
illuminated.
The local length of lens exceeds the flash coverage.
•
Check the flash coverage you set. This flash unit has the flash coverage between
10 and 100mm (4/3 system) or 20 and 200mm (135 system)