*
Product design and specifications are subject to change without notice.
Technical Data
LED Light
Power Supply
Output Power
Channel
Group
Color Temperature Range
Brightness Range
RGB Hue
100% Illuminance (LUX)(≈)
CRI (≈)
TLCI (≈)
Working Environment Temperature
Special Effects Modes
Mode
Zooming
Control Method
2.4G Wireless Transmission Distance
Silent Mode
Display
Dimension
Net Weight
SZ200Bi
AC100V-240V 50/60HZ
200W
32
16(A, B, C, D, E, F, 0-9)
2800K~ 6500K
0%-100%
0~360°
Max. 32500 1-meter testing distance
97
96
-10°~40°C
8 Categories(22 kinds)
Bicolor mode/ situational mode
Beam Angle 20°~65°
Smartphone APP/2.4G wireless/
DMX intelligent control
50m
Yes
Color Display
336*198.6*165mm
2.54kg
Maintenance
This product, except consumables e.g. adapter and adapter cable, is supported
with a one-year warranty.
Avoid sudden impacts and the product should be dedusted regularly.
Maintenance of the flash must be performed by our authorized maintenance
department which can provide original accessories.
Unauthorized service will void the warranty.
If the product had failures or was wetted, do not use it until it is repaired by
professionals.
Changes made to the specifications or designs may not be reflected in this
manual.
- 23 -
- 24 -
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
