FOREWORD
Thanks for choosing SEII series studio flash. It is a lightweight, compact and
durable flash with complete functions. Design for shooting studio portrait and
e-commerce product. This product is suitable for head shot, waist shoot, and
certificate photography, as well as product shooting, etc. It can also offer high
light, background light, or hair light in large studios and workshops. The SEII
flash offers:
CONTENTS
13
•
Slave Trigger Model
14
•
Buzz Function
14
•
Key Combination
14
•
Alarm Display
14
•
Memory Function
14
•
Wireless Control Function
15
•
Tube Replacement
15
Technical Data
16
Maintenance
Built-in Godox 2.4G wireless X system
Precise output displayed on LCD panel, 40 steps from 1/16 to 1/1 (or 6.0 to 10.0)
Use optional X1, XT16 or FT-16 trigger to control the flash power ratio, modeling
lamp and buzzer, as well as flash triggering
Compact and lightweight body with Bowens mount to add almost any studio light
shapers
150W modeling lamp adjusts in 5% to 100% power levels
Outstanding output stability, no more than 2% shifts when under the same output
Anti-preflash function enables synchronization with cameras that have a one-
preflash firing system
Auto memory and recovery of adjusted panel settings
0
Foreword
8
09
Warning
0
Caution
9
Names of Parts
10
10
•
Body
11
•
LCD Panel
11
•
Accessories
11
•
Separately Sold Accessories
12
Operations
12
•
Flash Preparation
12
•
Power Connection
12
•
Modeling Lamp
13
•
Power Output Control
13
•
Test Button
13
•
Sync Triggering
13
•
GR/CH Button
- 09 -
- 10 -
To prevent damage to the product or injury to you or to others, read the
following warnings in their entirety before using this product. Keep these
safety instructions where users can read them for ready reference.
Do not disassemble or modify. Should the product break down, send the
defective back to the authorized service center for inspection and maintenance.
Keep dry. Do not handle with wet hands, immerse in water, or expose to rain.
Keep out of reach of children.
Please put the device in a ventilation environment and keep the parts of lighting
and heat dissipation holes are unobstructed. Do not use in flammable
environment.
As this product adopts make and break device, please keep it easy to be used.
No touching the heating parts of this product.
Please turn off the power and wear insulated gloves before installing and
connecting accessories. When replacing the tube or modeling lamp, please
make sure that the tube is cool and wear insulated gloves to prevent burns.
Do not flash directly towards naked eyes (especially those of babies), otherwise
it may lead to visual impairment.
Disconnect from the power supply when it will not be used for an extended
period.
CAUTION
After 30 continuous flashes at full power, the flash should be cooled down for
about 3 minutes. Overheating will occur if it is used continuously without cooling
down.
Do not keep using the modeling lamp for a long time; otherwise flammable
accessories attaching to flash head, e.g. softbox will get burnt. A 10-minute time
is recommended in this case. After 10 minutes, cool it down for 1 minute.
When using a snoot, do not keep the modeling lamp on for a long time or fire too
frequently (not over six times for one minute). Overheating will result in damages
for strobe housing and/or studio light.
Avoid sudden impacts as this can damage the flash tube and/or modeling lamp.
Warning