SEPARATELY SOLD ACCESSORIES
The product can be used in combination with the following accessories sold
separately, so as to achieve best photography effects:
Wireless power-control flash trigger, Power Inverter, Softbox, Photographic
Umbrella, Light Stand, Barndoor, Snoot, etc
OPERATIONS
Flash Preparation
Power Connection
1.Take down the lamp
cover. Install the modeling
lamp and put on the glass
protection cover and the
standard reflector.
(To uninstall the standard
Use the power cord to connect the flash to an AC power source and turn on the
power switch (3). The lamp on the power switch turns on, indicating it's connected.
2. Attach the flash unit onto an appropriate light stand. Adjust the mounting bracket
(18) for a good angle and make sure it's tightened and fixed. Use the direction
adjusting handle (20) to adjust the flash to a desired direction. Umbrella input (19)
is for different photo umbrellas to put in.
Modeling Lamp
Modeling Lamp Button (6) controls the modeling lamp status: when modeling lamp
indicator lights up, modeling lamp is on; if not, modeling lamp is off. Modeling lamp
When there is flammable accessory on the flash unit, do not keep the
modeling lamp on for a long time. It is recommended to cool it down
for one minute after 10 minutes' working.
Power Output Control
Flash output controller (5) decides different power output, satisfying the light
requirements in different environment. The power is adjustable freely from 5.0 to
10.0 which will be accordingly told on the digital display (10)."OF" on the display
indicates that the flash triggering function is turned off.It can discharge
automatically when the flash output is adjusted from high to low.
Test Button
To fire the flash without taking a picture, press the test button (9). It can also help
adjust the flash brightness when combined
with the flash output controller (5).
Sync Triggering
The sync cord jack (2) is a Φ6.35mm plug.
Insert a trigger plug here and the flash will be
fired synchronously with the camera shutter.
Slave Trigger Model
Three slave triggering models are available and can be set by pressing Slave
Model Button (8).
1. No optical control: The slave triggering indicator (13) is off, indicating the slave
triggering function is shut down.
2. One fire model: The slave triggering indicator (13) glows blue, indicating the
flash will fire synchronously on one external flash. In this model, the flash can
function as an auxiliary lamp, offering various effects of light and shadow.
3. Anti-preflash model: The slave triggering indicator (13) glows red, indicating the
flash will receive two external flashes within 2 seconds and will fire synchronously
after receiving the second flash. In this model, the flash can function as an auxiliary
lamp, applicable to TTL system. With this anti-preflash function, synchronization is
supported with cameras having a one-preflash firing system.
Buzz Function
The sound button (7) is used for deciding whether there is sound reminder for
output controller (4) is used for adjusting the power output level of modeling lamp.
Modeling lamp will be off automatically after lighting for 2 hours, avoiding overheat
due to long-time lighting when the user is not nearby.
- 12 -
- 11 -
