2. Installing Lithium Battery
●
Turn the Power Switch (04) off.
●
Target the socket of the lithium battery
towards the
"
+
" "
-
"
contacts of the Battery
Compartment (09). Push the battery in until
it locks.
●
Power the light on.
●
After using the light, please power it off.
Using the Video Light
●
Screw the Knob C (14) to the highest
point and install the light stand onto the
Bracket Mounting Hole (16).
●
Tighten the Knob C (14).
Operation
1.
Power Supply
●
Insert lithium battery or connect the light with
DC power supply. Switch the power on, the
Power Indicator is on and the video light
giving out light.
2. LED General Mode:
●
in initial state, power the LED light on to enter LED
general mode (long press the RUN/STOP button
to switch LED general mode and DMX mode).
Color Temperature
5600K
3300K/5600K
3400K~5500K
4.
Wireless Remote Control
With 433 MHz wireless system, this product has remote grouping and control function.
Up to 6 groups of LED light can be controlled. 16 channels are available with strong
anti-interference capability.
Please set the channels and groups of LED video light to the same as those of remote
control before usage.
Light Brightness Range
0%~100%
0%~100%
25%~100%
Adjusting Channel/Group of the LED Video Light
●
Press the CH/GR button and the group icon blinks. Turn the select dial to choose
a group ID (A to F).
●
Press the CH/GR button twice and the channel icon blinks. Turn the select dial to
choose a channel ID (1 to 16).
Adjusting Channel/Group of the Remote Control
●
Press the CH/GR button and the group icon blinks. Press the
“+”
“-”
button to choose
a group ID (A to F).
●
Press the CH/GR button twice and the channel icon blinks. Press the
“+”
“-”
button to
choose a channel ID (1 to 16).
Adjusting Light Brightness/Color Temperature with the Remote Control
●
Press the“+””-“button to adjust the light brightness.
●
Press the SET button of the remote control once and the color temperature icon blinks.
Press the
“+”
“-”
button to adjust the color temperature.
Note:
The wireless signal can be received only when the LED light is power on.
3. Light Brightness/Color Temperature Adjustment:
●
Light Brightness Adjustment: turn the select dial on
the body to adjust light brightness from 0% to 100%.
●
Color Temperature Adjustment: short press the SET
button and the color temperature value will be
blinking. Then, turn the select dial to adjust color
temperature from 3300K to 5600K.
Model
LED1000D II
LED1000Bi II
