Other Operation Tips:
●
Pressing the ON/OFF button on the remote control can turn on/off all the LED groups.
●
Pressing the “SET” button on the remote control for 2 seconds can turn on/off the
current LED group.
●
The remote control will auto power off after four hours of idle operation.
Tips of Using Remote Control:
(
1)When using the Daylight Version LED1000D II, please set the color
temperature of the remote control as 5600K constantly;
(
2)Please remove the battery if the light will not be used for an extended period
of time.
5.
Replacing
A
Color
Filter
●
Pinch
the
edge
of
the
color
filter
(
02
)
and
pull
it out upwardly.
●
Insert
a
new
color
filter
in
and
push
it
downwardly.
Then
the
color
filter
is
securely
in
position
.
What’s in the Box of LED1000II?
Included Item
LED Video Light
Remote Control
Power Adapter
Power Cord
Diffusion Filter
Yellow Filter
Blue Filter
NO
.
1
2
3
4
5
6
7
LED1000D II
1 PC
1 PC
1 PC
1 PC
1 PC
1 PC
1 PC
LED 1000Bi II
1 PC
1 PC
1 PC
1 PC
1 PC
NO
NO
LED Video Light
Remote Control
Power Adapter
Power Cord
DMX Mode
1.
Choose DMX Mode
●
In the initial state, hold down the RUN/STOP
button and power the light on to enter DMX mode,
and the brightness value and color temperature
value will be displayed on the LCD panel.
●
In LED general mode, long press the RUN/STOP
button to enter DMX mode. In this way, the
brightness value and color temperature value won’t
be displayed on the LCD panel.
2.
Set DMX Channel
●
Press the SET button and the DMX channel will
be blinking. Turn the select dial to set DMX from
1 to 512.
3.
Connect to Console
●
Choose DMX port according to the model to
be controlled.
Each light will occupy two DMX
channels and the light brightness or color temperature can be adjusted.
Note: In DMX mode, the color temperature and light brightness can only be
controlled by the console.
