07 Foreword
08 Warning
08 Caution
09 Names of Parts
09
●
Body
09
●
Accessories
10 Instructions for Use
10
●
Flash Preparation
10
●
Power Connection
10
●
Modeling Lamp
10
●
Flash Output Control
10
●
Test Button
10
●
Sync Triggering
11
●
Slave Trigger Model
11
●
Tube Replacement
11 Technical Data
12 Maintenance
Contents
Foreword
Thank you for purchasing Mini Master Series Studio Strobe. This
device is designed for photographers seeking a high quality studio
equipment at an affordable price. With its well-chosen key components
and parts, the product is of high quality, stability and reliability for all
portrait, fashion, wedding art, advertisement photography and video
shooting etc.
8
7
To prevent damage to the product or injury to you or to others, read
the following warnings in their entirety before using this product. Keep
these Warning where users can read them for ready reference.
Do not disassemble or modify. Should the product break down, send the
defective back to the authorized service center for inspection and
maintenance.
Keep dry. Do not handle with wet hands, immerse in water, or expose to
rain.
Keep out of reach of children.
Please put the device in a ventilation environment and keep the parts of
lighting and heat dissipation holes are unobstructed. Do not use in
flammable environment.
As this product adopts make and break device, please keep it easy to be
used.
No touching the heating parts of this product.
Please turn off the power and wear insulated gloves before installing and
connecting accessories. When replacing the tube or modeling lamp, please
make sure that the tube is cool and wear insulated gloves to prevent burns.
Do not flash directly towards naked eyes (especially those of babies),
otherwise it may lead to visual impairment.
Disconnect from the power supply when it will not be used for an extended
period.
Warning
Caution
After 30 continuous flashes at full power, the flash should be cooled down for
about 3 minutes. Overheating will occur if it is used continuously without cooling
down.
Do not keep using the modeling lamp for a long time; otherwise flammable
accessories attaching to flash head, e.g. softbox will get burnt. A 10-minute time
is recommended in this case. After 10 minutes, cool it down for 1 minute.
When using a snoot, do not keep the modeling lamp on for a long time or fire
too frequently (not over six times for one minute). Overheating will result in
damages for strobe housing and/or studio light.
Avoid sudden impacts as this can damage the flash tube and/or modeling lamp.
