Godox AD100Pro, Руководство пользователя

Страница: 14 / 121

14
Calculating the Shutter Speed
During stroboscopic flash, the shutter remains open unit the firing stops. Use the
formula below to calculate the shutter speed and set it with the camera.
Number of Flashes / Flash Frequency = Shutter Speed
For example, if the number of flashes is 10 and the firing frequency is 5Hz, the shutter
speed should be at least 2 seconds.
To avoid overheating and deteriorating the flash head, do not use stroboscopic flash
mode than 10 times in succession. After 10 times, allow the camera flash to rest for a t
least 15 minutes. If you try to use the stroboscopic flash more than 10 times in
succession, the firing might stop automatically to protect the flash head. If this happens,
allow at least 15 minutes rest for the camera flash.
• Stroboscopic flash is most effective with a highly reflective subject against a dark
background.
•
Using a tripod and remote control is recommended.
•
A flash output of 1/1 and 1/2 cannot be set for stroboscopic flash.
• Strobo scopic flash can be used with “buLb”.
•
If the number of flashes is displayed as “ -- ” the firing will continue until the
shutter closes or the battery is exhausted. The number of flashes will be limited
as shown by the following table.
Maximum Stroboscopic Flashes
Flash
Output
Hz