3. If colors are still tinted or incorrect, calibrate the color.
A photo print cartridge must be installed for color calibration.
4. Reprint the photograph.
•
If colors are still tinted or incorrect, then open the Printer Properties dialog box,
select the Color tab, then do the following:
1. If the colors are too yellow, move the Color Tone slider towards Cooler.
2. If the colors are too blue, move the Color Tone slider towards Warmer.
3. Reprint the photograph.
•
If colors are still tinted or incorrect, calibrate the print cartridges.
Document prints slowly
Several variables can slow the printer's performance.
• Multiple software applications are open
The computer does not have sufficient resources for the printer to print at its
optimum speed.
To increase printer speed, close all unnecessary software applications when
printing.
• Complex documents, graphics, or photographs are printing
Documents containing graphics or photographs print slower than text documents.
• Best or maximum dpi print mode is selected
The printer prints slower when Best or Maximum dpi is selected as the print quality.
To increase the printer speed, select a different print quality mode.
• computer does not meet system requirements
If your computer does not have enough RAM or a large amount of free space on the
hard drive, the printer processing time will be longer.
Verify that the computer's hard disk space, RAM, and processor speed meet
system requirements.
Free up space on the hard drive.
• Printer is in single cartridge mode
The printer may print more slowly if it is in single cartridge mode.
To increase the print speed, use two print cartridges in the printer.
If you continue to have problems
If you continue to have problems after investigating the troubleshooting topics, shut
down, then restart your computer.
If you still have problems after restarting your computer, go to
Godex Europe GmbH
(Tel. +49 (0) 2193-53396-0) customer support at
www.godex.eu
17
