5
2. Setting up the BZB-2U Printer
2-1. Connecting the Printer to a Power Outlet.
1.
Plug the power cord into a power outlet.
2.
Plug the AC adapter cable into the power jack at the rear of the BZB printer
3.
Turn the BZB printer on by pressing the power switch.
4.
The LED on the printer will turn red.
5.
Proceed to 2-2 Loading your BZB printer with Labels.
2-2. Connecting the Printer to a PC
1.
Be sure the printer is powered off.
2.
Plug the power adapter into the printer power jack.
3.
Connect the printer to the parallel interface on the PC (with the cable provided)
4.
Power on. The LED light will be red (no label) or green.
2-3. Loading the BZB Printer with Labels
Loading small-size label roll
1.
Press the two lock switches (part 6) and lift up a little to open the rear cover. Then insert a
small-size label roll onto the core shaft (see figure 2.3.1).
Fig. 2.3.1
2.
Place the roll into the groove.
3.
Insert the edge of labels into the label guide, until the edge is blocked by the printhead.
4.
Press feed button to drive the label (under the printhead) into the printer.
