Goddess IC 230, Инструкция по эксплуатации

Страница: 32 / 40

ENG
ENG - 32
MAINTENANCE AND CLEAN
Clean the appliance after each use. Disconnect the plug and wait until the unit cooled off. Do
not use fuel, paint thinner, a brush or polishing powder to clean the induction cooker.
Pull the power plug prior to cleaning the device. Do not use any caustic cleaning agents and
make sure that no water penetrates the device.
To protect yourself from electric shock, never immerse the device, its cables and the plug in
water or other liquids.
Wipe off the ceramic field with a damp cloth or use a mild, non-abrasive soap solution.
Wipe off the casing and the operating panel with a soft cloth or a mild detergent.
Do not use any petrol products to not damage the plastic parts and the casing/operating
panel.
Do not use any flammable, acidy or alkaline materials or substances near the device, as this
may reduce the service life of the device and lead to deflagration when the device is turned
on.
Make sure that the bottom of the cookware does not scrape across the surface of the ceramic
field, although a scratched surface does not impair the use of the device.
Make sure that the device was properly cleaned before storing it in a dry place.
You can easily clean the surface of the induction hotplate by following the methods given in the
table below.
Type of contamination Method of cleaning Articles used for cleaning
Control panel Wet with hot water then wipe
dry.
Cleaning sponge
Accumulation of dirt Wet with hot water then wipe
it dry with coarse sponge.
Special cleaning sponge for
ceramic glass.
Rings and lime crumbles Apply white vinegar to the soi -
led zone, then wipe dry with
soft cloth.
Special descaler for ceramic
glass.
Burnt on food ,melted alumi -
num or plastics.
Use a scraper suitable for
ceramic glass (to protect
glass, a silicon product is pre -
ferred) to remove residue.
Special cleaner for ceramic
glass.
•
•
•
•
•
•
•
•
•