Goddess IC 230, Инструкция по эксплуатации

Страница: 28 / 40

ENG
ENG - 28
ThE FUNCTION MODE AND PRODUCT ADVANTAGES OF INDUCTION
hOTPLATES
PRODUCT INTRODUCTION
The Induction cooker GODIC230 with it’s advanced induction heating sysytem, micro-compute -
rized control, low energy usage and multi-functions, is the optimum solution for a modern kit -
chen.
The ‘Control Induction’ hob is designed with customer focus. Manufactured from high quality
materials ,the unit is safe and reliable, ergonomic and will enhance your cooking experience.
WORKING PRINCIPLE
The two main components of the ‘Control Induction’ hob are the induction heating coils, and
the control system. The electronic control system energises the coils, causing them to generate
powerful magnetic fields in the areas immediately above the coils. These fields travel through
the vitro ceramic plate on which the pans are placed and eddy currents are formed in the ferro -
magnetic materials in the pans. The tremendous energy generated by the eddy currents heat
the food directly by conducting the heat through the base of the pans and into the food. Good
quality pans suited to the particular cooking processes being carried out are essential for obtai -
ning good cooking results
This means saving time and energy, because contrary to common hotplates, the cookware is
heated up, not the heating element and the glass ceramics. Due to the technical characteristics
described above, another advantage is the very short start-up cooking time.
In addition, the heat supply promptly adapts to changed settings and can be controlled in small
steps. The induction hotplate reacts to changed settings just as fast as a gas stove, as the
energy reaches the pot immediately without having to heat up other materials first. The inducti -
on technology combines this fast reaction with the basic advantage of electricity, meaning being
able to exactly adjust the heat supply.
ADDITIONAL ADVANTAGES OF AN INDUCTION hOTPLATE:
As the hotplate is only heated up indirectly via the bottom of the cookware, over spilling food
cannot stick and burn and there is hardly any danger of burns for the user. The glass cera -
mics is only heated up by the hot cookware.
Once you take the cookware off the hotplate, the device automatically switches to standby
mode.
The device detects whether suitable cookware is placed on the hotplate. If this is not the
case, no energy is transmitted.
OThER FUNCTION
Detection of Small Articles
If a pot of less than 120 mm in diameter, small articles (knife, fork, scissors, keys , etc.) or non-
magnetic pots (such as aluminum ) are sensed, the buzzers give out an alarm lasting about 60
seconds. If a suitable pan is not placed on the hob the cooker will switch off.
Auto shutdown protection
Auto shut down is a safety protection function for your induction cooker. It will shut down auto -
matically if you forget to turn off your cooking.
When a pot is removed, the induction hotplate will stop heating that zone immediately and shut
it down after the buzzer sounds for 1 minute.
-
-
-