Goddess CL 190, Инструкция по эксплуатации

Страница: 32 / 44

ENG
ENG - 32
bATTERy INSTALATION AND REMOVAL
Make sure the cleaner is off before inserting or removing the battery.
Press and pull out the battery cover in the direction of the arrows as shown in Fig. 1.
Insert / Unplug the battery plug into the socket (please note the direction) as shown
in Fig. 2.
Place the battery in the battery reservoir and close the battery cover. Make sure the battery
cover snap into the slot.
Fig. 1 Fig. 2 Battery socket
REChARGING bATTERy
To ensure the best permormance of the rechargeable battery and lengthen its lifespan, the
baterry is best used after fully charged for 15-16 hours initially. The charging function will be
cut off automatically for charging 15-16 hours continuously.
When vacuum cleaner stops and emits a buzz of warning, the buzzer indicates that the
battery needs immediate charging. The buzzer will sound every minute until ran out of batte -
ry.
When charging, make sure the cleaner is switched off and the battery is properly installed.
Plug the end of the d.c adaptor (P17) into d.c jack at the side of the cleaner first, and then
plug the a.c end of the adaptor into the a.c power outlet on the wall Fig. 3.
The power indication lamp stays green when the battery is fully recharged.
P5 d.c jack
P6 Power indication lamp
P17 Adaptor plug (d. c 24V 500mA)
Fig. 3
1)
2)
3)
4)
1)
2)
3)
4)
5)