Gocycle Service Document: G2 Servo 1.0
October 2014 © Karbon Kinetics Limited. All Rights Reserved.
2
B
EST
P
RACTICE
G
UIDELINES
Before conducting any service or maintenance on the Gocycle ensure the following points
are adhered to:
1.
The battery must be in ‘Sleep Mode’ (switched off).
2.
Ensure the Gocycle is appropriately secured to prevent injury and damage.
3.
If the Gocycle has been ridden continuously for more than 5 minutes, allow a minimum of 30
minutes before performing any maintenance or service activity on the electrical system.
Examples include removing, installing connecting or disconnecting the battery.
4.
If maintenance is being performed within 30 minutes of usage, components such as the battery,
motor and gearbox may be hot. Treat these components with care and allow time to cool to a
safe handling temperature before conducting any maintenance.
5.
Read and understand the following service document fully.
6.
Only use the tools specified to complete assembly instructions and ensure torque requirements
are met and checked.
7.
Follow all instruction steps accurately and in the correct order, taking note of any cautions
and/or warnings.
8.
If in doubt, or you require further explanation on a procedure, please contact your authorised
Gocycle Service Centre for assistance or our Gocycle Technical Support Executives.
