Gocycle Service Document: G2 Servo 1.0
October 2014 © Karbon Kinetics Limited. All Rights Reserved.
19
5.4.
Reattach the Cable
Guide Lower with Servo to
the Cleandrive.
5.5.
Secure the Servo
in position with the three M3
x 25 Caphead bolts,
ensuring the washers are
present.
5.6.
The Chain must
now be looped back over the
Servo before the Servo
springs can be reinstalled.
Refit the E-Shift Spring.
5.7.
It helps to rotate
the spring away from the
Servo to line up the end of it
with the hole in the Servo
Horn.
