Goclever CITY BOARD CBLCRN, Руководство пользователя

Страница: 12 / 72

USE
Step 1
. BOARD CALIBRATION The board should be calibrated preferably right after unpack-
ing, before its first use. The calibration is necessary to set the gyro-sensors, which might have
been deranged during the transport if impacted, appropriately. Performing calibration:
Place the board on a plain flat surface. Make sure that the board is off. Using a cross-
level, level both wheels simultaneously. It is of utmost importance that both wheels are
levelled evenly and simultaneously.
After making sure that both wheels are properly levelled, press POWER (G) button and hold
it for 5 seconds until blue diodes start to flash. The board will be calibrated when the diodes
stop flashing. Turn it off, then again on, and it will be ready to use.
Switch on the board pushing the power button (G).
Step 2.
Correctly position your feet on the footplate (H.1). First, put one foot on the board.
The sensor will activate and the indicator will change into green. Put the other foot of the
footplate to start riding.
Step 3. Control the movement of the board by balancing your body, keeping the center of
gravity to maintain balance. By gently balancing your body forwards and backwards you
will keep the board moving (H.2). Please remember not to make any rapid body move-
ments.
Tip: When riding the board, slightly relax your legs and bend them at the knees to maintain
balance.
Step 4. Turn right and left on the board (H.3) if You want to make a turn. Transfer your weight
to the front part of your left foot to turn right. Transfer your weight to the front part of your
right foot to turn left.
Step 5. Climbing off the board. Keep the board well balanced before climbing off. Put one
foot on the ground and quickly take the other one from the board.
Note: When descending from the device it must be properly leveled ensuring stability and
balance.
EN