Goblin IB70210, Инструкция по эксплуатации

Страница: 10 / 12

To clean the foam pre-filter
1 Unclip and remove the motor unit.
2 Turn the motor unit over.
3 Remove and clean the filter using
a soft brush or wash in warm soapy
water.
4 Ensure the filter is totally dry before
refitting.
5 Make sure it is secure on its two clips.
To clean the motor protection
panel filter
1 Slide open the drawer at the rear of
cleaner.
2 Remove filter and clean between
lower pleats with a soft brush.
IMPORTANT
The filters should be replaced at least
every 6 months or immediately if they
become damaged.
To clean the exhaust filter
1 Pull out the exhaust frame .
2 Remove the filter and tap to remove
the dirt.
Cleaning the filters Cleaning the filters
Cleaning the filters Cleaning the filters
Cleaning the filters
If the filter condition indicator shows red either the :
• bag needs to be changed
•
foam pre-filter needs to be cleaned
•
motor protection panel filter needs to be cleaned
• Also check hose for blockages
If after changing the bag or cleaning the filters the condition indicator still shows red then
the filters should be replaced.
10