Goblin Goblin 770 Sport, Руководство пользователя

Страница: 36 / 40

Bell Crank Lever
[H0406BM-S]
- 2 x Tail Pin.
- 1 x Uniball M2.
- 1 x Uniball Spacer.
- 1 x Bell Crank Lever.
- 2 x Flanged Bearing 3x 7x3mm.
- 1 x Head Cap Screws M3x22mm.
- 1 x Head Cap Screws M2x8mm.
- 1 x Washer 3x 4x0.5mm.
- 1 x Spacer 3x 4x9.6mm.
Swashplate Set HPS
[H0422BM-S)
- 1 x Swashplate Assembly.
- 2 x Bearings 30x 37x4mm.
- 6 x Uniballs M3x4 5 H3.
- 1 x Uniball M3x4 5 H18.
- 3 x Head Cap Screws M2x5mm.
- 3 x Swasher 2x 5x0.5mm
Damper
[H0426-S)
- 3 x H0426-A.
- 3 x H0426-B.
- 3 x H0426-C.
- 3 x Washers 10x 16x1mm.
- 3 x Washers 10x 16x0.2mm.
- 3 x Orings 3050.
Boom 770 Sport
[H0977-S]
- 2 x Head Cap Screws M3 x 12mm.
- 2 x Nylon Screw M8x20mm.
- 1 x Flat Head Cap Screws M3x8mm.
- 1 x Boom 770 Sport.
- 2 x Locking Element Tails.
- 2 x Double-Sided Tapes .
- 1 x Set Screws M3 x 20mm .
- 2 x Washers 3.1 x 12 x 1.8mm.
- 4 x Metric Hex Nylon Nuts M3.
- 2 x Boom spacers.
Canopy 770 Sport
[H0978-S]
- 1 x Canopy 770 Sport.
- 1 x Canopy Grommet.
- 1 x Canopy Mousse.
- 1 x Canopy Edge Protection.
Tail Pitch Slider 3
[H0409-S]
- 1 x Tail Pitch Slider SET.
Blade Grip
[H0719BM-S]
- 2 x Blade Grip.
- 2 x Thrust Bearing 10x 18x5.5mm.
- 4 x Bearing 10x 19x5mm.
- 2 x Washer 10x 16x1mm.
- 2 x Socket Head Cap Screw M4x10mm.
Vertical Fin
[H0684-S]
- 1 x Vertical Fin.
- 2 x Sticker.
Main Linkage
[H0417-S]
- 2 x Main Linkage.
- 4 x Uniballs M3.
F3C Landing Gear Set
[H0454-S]
- 2 x Plastic Landing Gear Support.
- 2 x Aluminum Landing Skid.
- 4 x Cone Point Set Screws M4x4.
- 4 x Aluminum M3 Washer.
- 4 x Head Cap Screw M3x16mm.
- 4 x M3 Lock Nut.
FBL Support Low
[H0727-S]
- 3 x FBL Support Low.
- 5 x Head Cap Screw M3x8mm.
- 1 x Flat Head Cap Screw M3x8mm.
Main Frame
[H0976-S]
- 1 x Main Frame.
Landing Gear Rod
[H0431-S]
- 2 x Landing Gear Rod.
- 4 x Landing Gear Plug.
- 4 x OR DI=6,75, S=1,78.
Tail Hub
[H0418-S]
- 1 x Tail Hub.
- 1 x Set Screw M4x6mm.
- 3 x Socket Head Cap Screws M3x8mm.
- 3 x Washer 3x 7x1mm.
- 3 x Washer 5x 7x0,2mm.
Tail Shaft
[H0419-S]
- 1 x Tail Shaft.
- 2 x Set Screws M4x6mm.
Pin M2
[H0435-S]
- 3 x Pin M2.
- 3 x Spacer 2x 3x3mm.
- 3 x Tail Pitch Slider Link.
- 6 x Socket Head Cap Screws M2x6mm.
Page 34
Chapter 17, Spare Parts