Goalsetter Systems Champion Signature Series Скачать руководство пользователя страница 4

Step 1:

 Locate and unpack a 4” ground anchor (Item 

G2440). 

Remove plastic plugs from bolt holes and ensure the 

threads are in good condition. 

REPLACE THE PLUGS

 – they will 

keep concrete and debris from the bolt holes during installation. 

Leave the hinge pin in place as well.

Step 2:

 

Determine hole location. 

When installed, the 

edge of the ground anchor must be a minimum of 6” (15.2 cm) 

away from the playing surface. Follow One Call or your utility’s 

recommendations as to how close you may dig to a marked utility.

IMPORTANT

You 

MUST

 dig the anchor hole at least 48” (1.2 m) deep.

WARNING

Before digging for the ground anchor, check for underground 

power, gas, telephone, water and other utility lines. Failure to do 

so could result in serious injury. See 811 One Call Warning box 

on page 2 for more information or call your local utility company.

Step 3:

 

Dig hole

 48” to 50” (1.2 m – 1.3 m) deep and 14-16” 

(0.35 m – 0.40 m) in diameter using a spade, shovel, auger or 

post hole digger. 

 
 
 
 

TIME OUT TIP:

 If you plan on mixing concrete in  

 

 

stages, work quickly to minimize time between batches.

Step 4:

 

Mix concrete. 

Put concrete in wheelbarrow. Add the 

amount of water recommended on the bag, and mix with hoe.

Step 5:

 

Begin adding concrete 

into hole until concrete is 

approximately 28”- 30” (.7 m – .8 m) deep. 

4

 

TIME OUT TIP:

 The arrow on the decal

 

  

MUST

 be pointing toward the playing surface.

Step 6:

 

Position 4” ground anchor (Item G2440) in 

center of hole

 with hinge side toward and parallel with playing 

surface. Using a level, ensure the anchor is level front-to-back 

and left-to-right. All edges of the ground anchor must be 6” (15.2 

cm) away from all sides of hole and the top of the ground anchor 

within a range of 1”- 3” (25-75 mm) above the level of the playing 

surface.

 

 

TIME OUT TIP:

 As you add concrete, occasionally 

 

 

insert a stir rod (such as a broomstick) into three 

 

 

or four places in the concrete and plunge up and 

 

 

down to help eliminate air bubbles.

Step 7: 

Continue adding concrete

 until concrete is within 

1”- 1.5” (25-38 mm) of anchor plate bottom, or level with the 

landscape – whichever comes first. Slope top of concrete away 

from pole with trowel to create a smooth surface.

IMPORTANT

•  Periodically re-check the level of the anchor plate in both 

directions as you add more concrete. 

•  Slope the top of the concrete fill away from the ground  

anchor in all directions to shed moisture away.

 

TIME OUT TIP:

 If you must adjust the height,  

 

 

be sure to re-check level and that the anchor is 

 

 

parallel with playing surface!

Step 8:

 

If needed, adjust anchor plate height. 

The top of 

the ground anchor should be within a range of 1”- 3” (25-75 mm) 

above playing surface. Be sure to re-check level.

6" (152 mm)
minimum AND
parallel

Pla

ying

 S

urf

ac

e

Check level both
directions

  Ground Anchor Installation

 

1”- 3” (25-75 mm) minimum

 

 

14-18”

(0.36-0.5 m)

6" (152 mm)

all sides

Playing

Surface

42”

(1.1 m)

6” (152 mm)

48-50”

(1.2-1.3 m)

Содержание Champion Signature Series

















Отзывы: