GOALRILLA B6101, Руководство пользователя

Страница: 7 / 19

6.
Figure 6
NOTE: Tighten bolts snug but, do not over tighten.
Board Arms must pivot freely.
7.
8.
Figure 5
Secure Actuator (#16) to Lower Arm (#11) using one Bolt
(#8), two flatwashers (#21), four Plastic Washers (#53) and one
Lock Nut (#54). See Figure 5. Tighten bolts (#7) and (#8)
snug but, do not over tighten. Board Arms must pivot
freely.
Attach Middle Arm (#24) to Pole (#2), as shown in
Figure 6, using Bolt (#7), two Flat Washers (#3),
four Plastic Washers (#5) and Lock Nut (#4).
8
21
53
54
21
53
53
53
14
11
7
3
5
9
5
4
3
5
9
2
24
N
OT
E:
Lo
nge
r d
ista
nce
go
es
to
the
fro
nt.
NO
TE
:
Drain holes
must be on bottom
side
13 1/2”
If the four Tube Plugs (#9) are not already installed insert
them into open ends of Middle Arms (#24). It may be
necessary to use a rubber mallet to tap the plug in.
7