GOALRILLA B6101, Руководство пользователя

Страница: 10 / 19

Figure 9
13.
NOTE: Do not remove the nuts #35 you installed in step 2 (pg. 5).
Locate hardware needed to mount pole to anchor bolts. You will need, eight flat washers
(#37), four lock washers (#36), four hex nuts (#35) and four thread protectors (#34).
NOTE:
If basketball system needs to be
moved,
do not try to salvage
caps. Caps (#34) will be tight,
please remove with plyers and
discard. New caps will come in
new anchor system.
NOTE:
If (#34) caps are missing for any
reason please call customer service.
DETAIL A
PLACING THE POST ON THE ANCHOR SYSTEM
REQUIRES AT LEAST FOUR CAPABLE ADULTS.
POLE WILL WANT TO LEAN WHILE ATTEMPTING TO
STAND IT UP ON ANCHOR BOLTS.
Push on Thread Protector Cap (#34) until it is securely in place. Cap may be tight, push hard but DO NOT hit with
a hammer! See Figure 9 and Detail A .
Put a flat washer (#37) on each anchor bolt. Lift post onto anchor system and secure with one flat washer (#37),
one lock washer (#36) and one hex nut (#35) for each anchor bolt. Tighten Fasteners finger tight, leave loose
enough to level pole. Place a level on pole and adjust bottom nuts #35 until pole is level (left to right and front to
back). Tighten top four hex nuts #35 tight. See Figure 9 .
NOTE:
Bottom nuts #35 can be used for
leveling system. See
Step 14 .
14.
15.
34
34
35
36
37
37
35
(Bottom Nut)
Let concrete cure for a MINIMUM of 72 hours.
10