Go Rhino dominator 2 series Скачать руководство пользователя страница 2

Страница: 2 / 5

STEP 2.

This installation uses three mounting brackets per side.

STEP 3.

Beginning with the passenger side, locate the holes in the lower body pinch mold for the front mounting

bracket.

STEP 4.

Loosely attach the flange of the front mounting bracket to the bottom of the lower body pinch mold using

the 3/8” x 1” hex bolts, washers, and nuts as shown.

FO5 MOUNTING BRACKET

3/8” X 1” HEX BOLT WASHERS & NUT

PASSENGER SIDE LOWER

BODY PINCH MOLD

F05 FRONT BRACKET

MOUNTING HOLES

Содержание dominator 2 series

Страница 2: ...ower body pinch mold for the front mounting bracket STEP 4 Loosely attach the flange of the front mounting bracket to the bottom of the lower body pinch mold using the 3 8 x 1 hex bolts washers and nuts as shown FO5 MOUNTING BRACKET 3 8 X 1 HEX BOLT WASHERS NUT PASSENGER SIDE LOWER BODY PINCH MOLD F05 FRONT BRACKET MOUNTING HOLES ...

Страница 3: ... the center mounting bracket STEP 6 Loosely attach the flange of the mounting bracket to the bottom of the lower body pinch mold using the 3 8 x 1 hex bolts washers and nuts F06 CENTER BRACKET MOUNTING HOLES F06 MOUNTING BRACKET 3 8 X 1 HEX BOLT WASHERS NUT ...

Страница 4: ...racket to the bottom of the lower body pinch mold using the 3 8 x 1 hex bolts washers and nuts STEP 9 Position the passenger sidestep up to the mounting brackets and loosely attach it to the brackets using the 3 8 x 1 hex bolts washers and nuts as shown F06 REAR BRACKET MOUNTING HOLES F06 MOUNTING BRACKET 3 8 X 1 HEX BOLT WASHERS NUT ...

Страница 5: ...the body and then tighten all mounting bracket and sidestep nuts and bolts STEP 11 Repeat the above steps to install the driver side mounting brackets and sidestep MOUNTING BRACKET 3 8 X 1 HEX BOLTS WASHERS NUTS PASSENGER SIDESTEP ...