7
REV.01
INSTALLATION INSTRUCTIONS
© 2016 Go Rhino Products. All rights reserved
Step-2c Reference the OEM roof rack crossbar measurement, install and position (2) ¼” x ¾” hex bolts
in the channel of the 4 crossbars that will be facing down when the SRM roof rack is fully assembled,
(Fig 2c).
D
2
Fig 2c
Step-3 Place the front base above the crossbar with the top of the front base toward you, align the ¼”
hex nuts installed in the crossbar with the slots in the front base, then slide the font base into position
on the crossbar. Install ¼” x ½” button head screws, ¼” lock washers and ¼” flat washers to secure the
front base to the ¼” hex nuts in the crossbar. Snug but do not tighten the screws, (Fig 3). Repeat Step 2
and 3 to assemble and attach the rear base to a crossbar.
Fig 3
4
B-F
G
B-F
G
2
