background image

16

REV.01

Go Rhino warrants to Buyer that for a period of five (5) years from the date of shipment of the product(s) (“Warranty Period”) for 

black finishes and chrome finishes, that such products will materially conform to the specifications set forth in Go Rhino’s 

specifications in effect as of the date of shipment(s) and will be free from material defects in material workmanship. 

Go Rhino warrants to Buyer that for the life of the product(s) from the date of shipment of the product(s) (“Warranty Period”) for 

polished stainless steel finished products purchased after April 2004, that such products will materially conform to the specifications 

set forth in Go Rhino’s specifications in effect as of the date of shipments and will be free from material defects in material 

workmanship. 

Warranty claims must be accompanied with the original invoice and photos of the product. It is the customer’s responsibility to clean 

regularly and protect finish with regular applications of a nonabrasive polish that is compatible with the product’s finish.

This warranty covers the cost of the product only and does not include the cost of removal, installation, third party modifications or 

shipping of the product. In no event shall Go Rhino be liable to buyer or any third party for any damage or harm caused by the 

product or use thereof, regardless of weather such damages were foreseeable and whether or not Go Rhino has been advised of the 

possibility of such damages, not withstanding the failure of any agreed or other remedy of its essential purpose. This warranty is void 

if the product shows signs of alteration, misuse, mishandling, improper care, neglect, improper application and/or damage due to

improper installation. 

With respect to any such product(s) during the limited warranty period, Go Rhino shall, in its sole discretion, either: (i) provide a 

one-time repair or replacement of such products (or the defective part) or (ii) credit or refund the price of such products at the pro 

rata contract rate provided that, if Go Rhino so requests, Buyer shall, at Go Rhino’s expense, return such product(s) to Go Rhino. The 

remedies shall be the Buyer’s sole and exclusive remedy and Go Rhino’s entire liability for any breach of the limited warrant(ies).

Go Rhino disclaims all other warranties except to the extent that any such warranty cannot be validly disclaimed under applicable 

law.

Finish Limited Warranty:

Limited lifetime on stainless steel products (after April 2004)
5 year warranty on black powder coat products
5 year warranty on chrome products
This warranty does not cover exposed welds

Finish warranty covers peeling, flaking, or cracking. Washing all finishes regularly with car wash soap and rinsing well with water is 

the best method for maintaining the finish on your products. You must also protect the finish with nonabrasive automotive wax on a 

regular basis. The use of any compound which contains abrasives becomes a self-defeating exercise as the compound scratches the 

finish and opens it to corrosion. The use of harsh chemicals used to remove bugs and tar may also cause the finish to fail and should 

be avoided.

If you are unsatisfied with your purchase please contact the establishment you purchased the product from. 

If you need to place a warranty claim  or need assistance, the Go Rhino customer service team will answer any questions you may 

have. Please contact the Go Rhino customer service team at 1-888-427-4466 during normal business hours Monday thru Friday 7 am 

to 5 pm PST. You may also email 

[email protected]

. In order to better serve you please provide a copy of the original invoice / 

receipt, a photo of the issue you are experiencing and a photo of the vehicle the product is installed on. 

All warranty returns must have an approved RGA number. The RGA number must be clearly marked on the exterior of the return 

package. All approved warranty returns must be shipped to Go Rhino Products, 1002 Carriers Drive, Laredo, Texas 78045.

INSTALLATION INSTRUCTIONS

LIMITED WARRANTY

PRODUCT REGISTRATION

Please remember to register your new purchase. You may register your product at 

www.gorhino.com

. Registering your product may 

help speed any future warranty or customer service inquiries.  

Thank you again for purchasing from Go Rhino Products

Please take a few minutes to view additional products for your vehicle and more at GORHINO.com

These installation instructions are available on the Go Rhino web site along with installation videos for 

many of our products. 

www.gorhino.com

www.bigcountryauto.com

www.gorhinopd.com

© 2016 Go Rhino Products. All rights reserved

Содержание 5934048T

















Отзывы: