2
Read the assembly and installation instructions completely and verify that all of the parts listed are accounted for. If you have
defective, missing or damaged parts or need assistance, please contact
Go Rhino
Products
for fast, friendly customer service
at: 1-888-427-4466 or email: [email protected]
Front Bumper Removal
Step-1
Remove the plastic fasteners and rubber air deflector from the bumper and bottom of the vehicle, (Photo 1).
Note: If the vehicle has these options or equipment.
Fog Lights
Unplug the fog light wiring harness and remove the plastic fastener securing the wiring harness to the bumper, (Photo 2).
Engine Block Heater
Remove the plastic fastener securing the power cord to the bumper.
Step-2
Remove the bolts (2) per side securing the bumper support brackets to the bumper, and loosed the bolts (2) per side
securing the support bracket to the vehicle frame, (Photo 3).
Step-3
Remove the bolts (2) per side securing the front of the bumper to the bumper brackets, (Photo 4).
Remove the bumper from the vehicle and set it aside.
#1
#2
Driver
Side
#3
Driver
Side
#4
Driver
Side
