GP-PWM-10
_________________________________________________________________________________
5
© 2017 Go Power!®
1.2 Specifications
Description
Value
Dimensions
(H x W x D):
100 x 102 x 29 mm
3.94 x 4.02 x 1.14 in
Weight: 178 g / 6.3 oz
Maximum Wire Gauge:
#4 AWG
Warranty: 5 years
•
PWM Charging
•
4 Battery Charging
profiles
•
4 Stage Charging
•
Monthly Equalize
option
•
Displays Charging
Current, Battery
Voltage, Battery State
of Charge, and Ah
charged since last
reset
•
Reverse Polarity
protected
•
Temperature
Compensated
•
RoHS Compliant,
environmentally safe
•
Accepts up to 160
watts of solar at 12
volts
•
Nominal System Voltage
12V
Max. Solar Array Current
10A (a
mperage is reduced above 50°C)
Battery Voltage Range
6V – 15.5V
Max. Solar Voltage
28V
Operating Consumption
(Display backlight on)
15mA
Operating Consumption
(Display backlight off)
6mA
Bulk/Absorption Voltage
(Sealed/Gel, AGM/LFP,
Flooded)
14.1/14.4/14.4V
(25°C / 77°F), 30min / Day or V <
12.3
Float Voltage
13.7V (25°C / 77°F), 14.0V(LFP)
Equalization Voltage
(Flooded only)
14.9V (25°C / 77°F),
2h / 28 Day or V < 12.1
Temperature Compensation
- 24mV/ºC / -13V/ºF
USB charger
5V, 800mA
Operating Temperature
Display Operating
Temperature
- 40 to 85°C / - 40 to 185°F
- 10 to 55°C / 14 to 131°F
Humidity
99% N.C.
Protection
Battery Reverse Polarity, Solar Array
Reverse Polarity, Over Temperature,
PV Short Circuit, Over Current
The total rated Maximum Power Current (Imp) of the PV input should not exceed 10 amps.
The GP-PWM-10 will limit PV current above 10 Amps. Although the GP-PWM-10 will accept PV
current greater than 10 Amps for a short duration, damage may occur if the GP-PWM-10 operates
continuously with greater than 10 Amps of PV input.
