gpelectric.com | [page 13]
GENERAL INFORMATION
AC Input Circuit Breaker.
The AC input circuit breaker protects the model from overload.
When an overload condition exists, the circuit breaker stops supplying output AC grid
power. To reset it, push the circuit breaker switch then the model will be back in normal
operation. The source fault should be corrected before you reset it.
Remote control green terminal
Remote port -
Use this port to connect the optional remote control unit to the Inverter.
Fan -
The rear panel must keep the distance at least 1 inch from any surrounding items.
Main switch ON / OFF does not control AC Grid input. Therefore when performing
maintenance please remove the AC Grid connection to prevent damage to the
GP-SW1500TS, then ensure the Main switch is in the OFF position.
12
11
10
9
1
2
3
6
7
8
4
5
9
10
11
12
