Original instruction manual
En
36 09/2019
DESCRIPTION PARTS NAME
1. Front grill
2. Nut of the blade
3. Blade
4. Fixing nut
5. Rear grill
6. Motor shaft
7. Oscillation knob
8. Switch box
9. Inner Tube
10. Height adjustment ring
11. Outer tube
12. Screws ( 4pieces)
13. Base A
14. Base B
15. Base cover
ASSEMBLY:
Assembly of the support feet:
•
Firstly, Loosen and remove the four screws from the bar
base, then cross the A&B bars so that these can
interlock.
•
Be sure to align the four holes in the bar base with those
on the flange of the Outer tube. Secure the flange to the
bars with the four screws.
•
Loosen and remove the Height Adjustment Ring from the
top of the Inner Tube. Slide the Base Cover down over
the assembly.
•
Replace the Height Adjustment Ring on top of the Inner
Tube. Pull the Inner Tube out from the Outer Tube to
