Go-On 994059, Инструкция по эксплуатации

Страница: 18 / 19

8
commonly graded as coarse (40-60 grit), Medium (80-120), Fine (150-180), Very Fine (220-240),
Extra Fine (280-320) and Super Fine (360 and above).
Coarse grit papers will remove material fast, and when followed by finer grit papers, makes for
much easier and quicker sanding.
For better surface quality, sanding with progressively finer grits removes the scratches left by the
previous paper and eventually leaves a smooth finish.
Roughly, the user can select the sanding sheet as below ways:
Coarse - for removing paint; for sanding of extremely rough wood
Medium - for sanding of rough or plain wood
Fine - for smoothing of wood; for finishing of bare wood; for smoothing surfaces with old paint
MAINTENANCE
Keep the ventilation openings clear and clean the product regularly.
If something unusual occurs during use, switch off the supply and disconnect the plug. Inspect
and repair the tool before using it again.
Repair of the tool must only be carried out by a qualified repair technician.
Repair or maintenance by unqualified personnel can lead to a risk of injury.
Use only identical spare parts for repairing a tool.
Care and cleaning
Clean the housing only with a damp cloth-do not uses any solvents! Dry thoroughly afterwards.
STORING
Store the machine, operating instructions and where necessary the accessories in the original
packaging. In this way you will always have all the information and parts ready to hand.
Pack the device well or use the original packaging in order to avoid transit damage.
Always keep the machine in dry place.